Contact us!

info@polyplast.com

 

+49(0)28 34 / 706-0
Facebook Linkedin Youtube
  • Deutsch

Imprint

© 2004-2017 Polyplast Müller GmbH & Co. KG, all rights reserved

Here is the information we are obliged to supply, which we aim to make accurate, in accordance with German law.

Publisher

Polyplast Müller GmbH & Co. KG

An der Bleiche 51
D-47638 Straelen
Tel.: +49(0)28 34 / 706-0
Fax: +49(0)28 34 / 706-990
info@polyplast.com

Managing Director:

Hans-Joachim Müller
Andreas Hausmann

Located: Straelen
Company Registration: Amtsgericht Kleve HRA 5571
VAT-No: DE119946449

Personally liable partner:
Advance Holding GmbH
Company Registration: Amtsgericht Kleve HRB 3733

Responsible for the content according Art. 18 Abs. 2 MStV: 

Hans-Joachim Müller
(address as above)

Trade chamber:

Niederrheinische Industrie- und Handelskammer Duisburg-Wesel-Kleve zu Duisburg
Mercatorstr. 22-24
47051 Duisburg
www.ihkduisburg.de

For questions and suggestions please contact

c/o Polyplast Müller GmbH & Co. KG

An der Bleiche 51
D-47638 Straelen
Tel.: +49(0)28 34 / 706-0
info@polyplast.com

Design + programming

ef+p, Düsseldorf

www.efp.de

The agents or creators respectively take responsibility for the design and realisation of this website, but not for its contents. For queries about the contents and/or legal rights please use the contact person listed above.

Privacy

In general it is possible to use our website anonymously; anonymous use, or use under a pseudonym is only not possible in the parts of the site which need a user identification.

By visiting our website, potential identification data (IP address, user URL, target URL, date and time of use, client software) will be stored on our server. This data will be used for identifying unauthorised access as well as statistical evaluation only. Any data so collected is anonymous and does not allow us to identify you. The exception to this is when you access secure areas of the website, where you use a password to gain access. In these instances, your user identification and password will be recorded for security reasons.

We will only store personal data if you have given your agreement. You have the right, on request, to see data relating to you, which is held on our system. Furthermore, you have the right to any such data being corrected or deleted.

Please note that by contacting us via one of our e-mail addresses, you automatically agree to us recording your data.

We would advise you that, in general, sending data via this website is not secure – e.g. by using our contact form. This means that data could be accessed by an unauthorised party or could even be altered.

For navigating around its databank and for producing correct images, our website uses so called ‘Session IDs’. For storing these identifications – activated each time a page is accessed for the first time – so called ‘cookies’ are being used, a form of communication between browser and server. These cookies are not being used for recording personal data. However, you can deactivate the use of cookies in your browser. In most cases this will not make a significant difference to the use of our website, as it might only slow down the loading of some pages. However, in the interest of optimising the performance of our website, we recommend you allow the use of cookies and JavaScript.

This website uses Google Analytics, a web analytics service provided by Google, Inc. (“Google”). Google Analytics uses “cookies”, which are text files placed on your computer, to help the website analyze how users use the site. The information generated by the cookie about your use of the website will be transmitted to and stored by Google on servers in the United States. In case IP-anonymisation is activated on this website, your IP address will be truncated within the area of Member States of the European Union or other parties to the Agreement on the European Economic Area. Only in exceptional cases the whole IP address will be first transfered to a Google server in the USA and truncated there. The IP-anonymisation is active on this website. Google will use this information on behalf of the operator of this website for the purpose of evaluating your use of the website, compiling reports on website activity for website operators and providing them other services relating to website activity and internet usage. The IP-address, that your Browser conveys within the scope of Google Analytics, will not be associated with any other data held by Google. You may refuse the use of cookies by selecting the appropriate settings on your browser, however please note that if you do this you may not be able to use the full functionality of this website. You can also opt-out from being tracked by Google Analytics with effect for the future by downloading and installing Google Analytics Opt-out Browser Addon for your current web browser: tools.google.com/dlpage/gaoptout.

Further information concerning the terms and conditions of use and data privacy can be found at www.google.com/analytics/terms/de.html or at www.google.com/intl/de/analytics/privacyoverview.html. 
Please note that on this website, Google Analytics code is supplemented by “gat._anonymizeIp();” to ensure an anonymized collection of IP addresses (so called IP-masking).”

Cookies

In some cases the websites use so-called cookies. Cookies do not cause any damage to your computer, nor do they contain viruses. Cookies are used to make our offering more user-friendly, more effective, and more secure. Cookies are small text files that are stored on your computer and that are saved by your browser.

Most of the cookies we use are so-called »session cookies«. They are automatically deleted after your visit is concluded. Other cookies remain stored on your computer until you delete them. These cookies enable us to recognize your browser at the next visit.

You can configure your browser in such a manner that you are informed of the setting of cookies, and that you only permit cookies on a case-by-case basis, that you activate the acceptance of cookies for specific cases, or reject the acceptance of all cookies, as well as activate automatic deletion of cookies when closing the browser. Deactivation of cookies can restrict the functionality of this website.

Terms of Use

Use of this website is conditional upon acceptance of the following conditions:

Contents

The information given on our website is, to the best of our knowledge, accurate and current, but we can not be held responsible for any errors or omissions, or any consequences arising from such errors or omissions.

The content is subject to change without prior notice.

All company and product names mentioned or trademarks are owned by the respective owners and are generally registered as trademarks. We do not represent other people’s trademarks as our own.

Liability

We cannot be held responsible for any damages, howsoever caused, arising from the viewing of, use of contents of, or downloading of data or programs from, information on our website. This also includes damage caused by a virus. The publication of this website falls under the jurisdiction of German law.

Links

Links to other websites are provided for user information only. We cannot accept responsibility for opinions, information, content or functionality provided by these websites.

Linkings

Prior permission is required before publishing any links to any elements of this website. Any links must credit the source of the information. This applies especially to the use of pages or data in a frame.

Quotes

The use of pages, texts and/or articles is only allowed in an uncut version, and if the contents have not been edited or altered in any way. Quotes are excluded, as long as they are marked as such and include the source of information.

General terms of delivery

We provide our General terms of delivery as a PDF-document. (To view PDF-files you need the Adobe Acrobat Reader.)

Alterations

The conditions of use are subject to change without prior notice.

Validity

If one of the aforementioned clauses happens to be invalid, the others are still valid.

Essentially Green

You can take our word

DIN ISO 50001 en
DIN ISO 50001 Bingen en
DIN ISO 9001 en
DIN ISO 14001 en

Join our team today!

Advance your career at Polyplast Müller

PPM Career Portal

Administration Produktion Logistik

Ihr direkter Draht zu uns

Telefon

E-Mail

Werkstudenten

Qualifikation in Theorie und Praxis

Administration
Production
Logistics

Career at PPM

Permanent positions for experienced professionals!

Discover our offering

Apprenticeship

With us, you can learn a lot

Student employee

Qualification in theory and practice

Good to know: On request, Polyplast Müller will make its technology park available to you for the high-quality production of a wide range of compounds.

Quality is the basis for your success. We offer you our expertise and our production facilities to outsource your production. Many well-known manufacturers take advantage of this service and develop – jointly with Polyplast Müller – specific products that are exclusively manufactured.

Every product is developed jointly with you in our well-equipped quality laboratories that greatly exceed industrial standards.

State-of-the-art production processes such as Buss kneaders, twin screw extruders, as well as continuous and discontinuous mixers can be selected for the most varied applications. At the same time, the extensive quality assurance system ensures consistent product quality.

The more demanding the requirements, the more appealing the challenge for Polyplast Müller’s technicians. We are only satisfied when we have been able to demonstrate all our expertise and when the end product optimally meets the needs of our customers. Fast and reliable availability, economic efficiency and the best processing properties are our standards.

As a reliable supplier of high-quality, customized solutions, Polyplast Müller has enjoyed an outstanding reputation in the cable industry for more than 35 years. One result of this extensive experience is a vast product range that meets the most diverse requirements of the cable industry. High-quality insulation and jacket materials for a wide range of applications based on PP, TPE-S and HFFR are manufactured on the most modern production facilities. We manufacture the PVC compounds known under the Decelith® brand in the PCW GmbH at the well recognized site in Eilenburg on special PVC production lines. This wide product range is rounded off by precisely matched colour and additive masterbatch.

PP-Compounds – the right choice for safety.

PPM offers special PP-based high-performance compounds with outstanding properties and excellent processability for the following applications:
  • Automotive cables up to +125°C acc. ISO 6722, LV112 and further standards
  • Cables with high resistance to reverse bending (eg. drag chain applications)
  • Data cables
  • Pilot wires in charging cables (electric vehicles)
  • UL 758 conform cables and wires in industrial applications (eg. servo – or sensor cables)

TPE-S Compounds – highly flexible.

Polyplast Müller provides specially matched TPE-S compounds for applications with high demands on reverse bending resistance.

Typical applications are:

  • ABS/ESP sensor cables in vehicles (-40 …+125°C)
    according to ISO 6722 and other standards
  • Door and tailgate wiring harnesses in vehicles
  • Control cables in the robotics area (e.g.: in drag chains)
  • Sensor cables in the industrial sector

We do not give the cold shoulder to flame retardation.

For years Polyplast Müller is developing and producing halogen-free, flame-retardant compounds that stand out clearly from the competition thanks to their excellent processing properties and consistent quality.

The PolyCable HFFR compounds can be found in many application areas:

  • Data- and telecommunication cables & wires
  • Building wiring acc. international fire safety standards (eg.: CPR)
  • Insulations and cable jackets acc. VDE 0207, IEC 60502, BS 7655 and further standards
  • Oil resistant cables (eg.: offshore- und ship cables)
  • Cables for railway applications

A brand that deserves trust – Decelith®.

For the PVC cable sector, Polyplast Müller offers an extensive, wide-ranging product portfolio, which, in addition to standard applications, also includes many technically very demanding solutions. The traditional Decelith® brand stands for a high degree of experience and precise knowledge of the specific requirements of the extrusion and application.

The Decelith® cable compounds can be found for example in:

  • Installation wires and cables acc. VDE, UL and other standards
  • Control cabinet cabling
  • Industrial control cables up to 105°C (UL)
  • Drag chain cable in the automation area
  • Highly oil resistant cables in the offshore area
  • Cold-flexible cables
  • Control- and power-cables in wind turbines
  • Crystal-clear audio cables
  • Highly flame retardant cables (e.g.: VW-1, FT-4)
  • Cables in the automotive sector according to ISO 6722

The Decelith® – cable compounds can also be complemented by special injection molding plug grades.

The crucial difference.

Every polymer and every requirement needs individual solutions in the colouring of cables. PolyCable Colour masterbatch is precisely adjusted to the application in question and is often developed on a customer-specific basis. Our plant at Bingen on the Rhine is exclusively focused on the development and production of colour masterbatch. Our laboratory installations can produce samples for you within a few days. A list of options is provided below:
  • Masterbatch for LDPE and XLDPE
  • Special masterbatch for HFFR compounds
  • PVC colour masterbatch
  • Universal colour masterbatch for PUR, PVC, PE, HFFR
  • Black masterbatch for UV protection

Small addition – large effect.

Additive masterbatch is more than the sum of its components: Apart from the careful selection of additives, it is immensely important to select a polymer type suitable for the intended application. The choice of an optimum compounding technology is essential for optimal dispersion and consistent product quality. Our additive concentrate range includes:
  • Antioxidants and metal deactivator systems
  • TMQ masterbatch for peroxide and silane systems
  • Highly efficient cleaning granulates

Whether apple green, sea blue or raspberry red, our colour masterbatch specialists at Bingen on the Rhine and in North America will show you an impressive range of 13,000 colour formulations. And if you still haven’t found what you are looking for, a qualified team of colourists working with state-of-the-art computer and manufacturing technology will reliably and flexibly develop your optimal colour solution. The PPM pigment concentrates can be designed to meet the highest colour fastness, covering power, thermal and UV stability requirements.

Every colour combination can be matched quickly and accurately. We deliver samples, small quantities or large volumes within a very short period of time. According to your individual needs.

Additives improve the characteristics of numerous plastic products. Even tiny doses are sufficient to impart far-reaching properties to plastic products such as anti-static capability, light stability, reduced friction (slip), flame retardation, and other additional properties that help to contribute to increase the product’s functionality. Our product portfolio includes:
leer

Eliminates sticking points – for easy handling.

Anti-block properties are required for film and flexible packaging production. Anti-block additives enable the reduction of adhesion (also known as “blocking”) between 2 film layers, which results in much better handling both during production and during later use of the product.

To ensure everything runs smoothly!

In film or flexible packaging processing, the COF (coefficient of friction) is a limiting factor for processing speeds. This is due to the tendency of films to adhere to metallic or other film surfaces. Slip agents considerably reduce this effect and provide for more efficient production conditions.

So that moisture does not stick.

Anti-fogging agents prevent the formation of condensation drops on plastic film. Condensation drops are undesirable on food packaging as they impair the appearance of the packaging and the packaged product is not clearly visible. In greenhouse film they prevent condensation from dripping off, which can lead to brown spots on plant leaves caused by the concentration of light. In anti-fogging agents, special additives are worked into the polymer which migrate to the surface and minimize surface tension.

For increased safety, even when it gets hot.

Flame retardants are traditionally used in building and construction, in the automobile industry, or in the field of electronics. Polyplast Müller offers flame retardants based on different substances which, when incorporated into the end product, prevent the spread of flames and flaming droplets and can reduce the formation of smoke.

Reliable protection for greater durability.

As most polymers can be damaged by UV radiation, UV protection is required in many application areas. This can be achieved by two different modes of action:

UV absorption: By converting UV radiation into thermal energy, UV absorbers form a protective film that protects the polymer and the packaged goods from damage.

UV stabilization: the addition of UV stabilizers can prevent polymer damage and increase its durability.

Perfect structures for perfect products.

High processing temperatures, as well as environmental influences, can damage the polymer structure in the end product. Thermostabiliser batches effectively reduce this effect and offer significant advantages during production, storage and in the end application.

For optimum processing and top-class results.

Processing aids are used in many applications to optimise processing conditions without affecting the end product. The fluoropolymers contained improve the melt flow of the polymer in the extruder and reduce the shear forces at the transition to the metallic wall. Material output can be increased by adding processing aids, and energy costs can be lowered thanks to pressure reduction. They are also an effective remedy for problems like shark skin and nozzle deposits.

Short cleaning times. Less downtime. In other words: a good, clean solution.

PolyPlus® LD 1925 ZZ is a versatile, stabilized, and extremely effective LLDPE-based purge compound specially developed to reduce the cleaning times of extrusion and injection moulding plants to a minimum. It should be used before dismantling and cleaning the extruder, during planned and unforeseen extruder downtimes and during material and colour changes.

PolyPlus® LD 1925 ZZ contains surfactants and abrasive agents with mechanical and chemical cleaning properties to remove degraded polymer and pigments from the extruder and from the die.

The use of PolyPlus® LD 1925 ZZ immediately before the cleaning process has shown that downtimes can be reduced my more than 50%!

This also applies for product and/or colour changes.

So sparks don’t fly.

Static charge can occur and cause static sparking when two plastic surfaces are rubbed against one another. It also favours the attraction of dust and reduces processing speeds. These negative surface effects can be prevented by adding migrating polar additives to the polymer matrix.

Perfect finished products combined with outstanding efficiency.

Fillers characteristically have a high concentration of mineral substances. Depending on the application, their use can produce properties such as increased stiffness, paper-like effects and better printability in the end product. In addition they can help to reduce polymer consumption in order to cut costs.

Knowledge to select the correct additive for an application is extremely important, therefore working with an experienced supplier you can trust is crucial. Polyplast Müller sees itself as an experienced technical advisor, as well as an innovator of new developments. We are able to meet customer requirements in a competent, flexible and qualitatively superior manner – regardless of the order size.

Those who value something special will make the right decision when choosing Polyplast Müller as their business partner.

All black masterbatch formulations are carefully tailored to every required application profile. Many of them meet even the highest test standards. This range features products for the cable industry as well as BAM* approved qualities which are required in geomembrane production, for example. With or without fillers – or with additional agents like UV or thermal stabilizers – Polyplast Müller black concentrates are convincing due to their attractive price/performance ratio and their wide range of possible applications.

* BAM – Bundesanstalt für Materialforschung und -prüfung (Federal Institute for Materials Research and Testing in Germany)

White masterbatch is primarily used for the production of films, blown bottles, injection moulded products and profile extrusions. Our high quality range of concentrates – such as for paper coatings – includes UV resistant solutions for silage stretch film as well as pigment filler mixes for standard applications.

With or without fillers – or with additional agents like UV or thermo stabilizers – Polyplast Müller white concentrates are convincing due to their attractive price/performance ratio and their wide range of possible applications.

Contact us

For further information read our privacy policy.

Downloads

Company Information
Product Information